System Operation; Live Screen Mode - Samsung SHR-2080 User Manual

SHR-2160/2162/2080/2082 USER'S MANUAL
1

System Operation

Turn the power on and the following LOGO pops up on the screen.
After the LOGO appears, all of LED in the front flickers 6 times to initialize the system for
operation.
Upon completion of normal initialization, the Live screen appears accompanying a beep
sound.
It takes approx. 1 min until a live image comes up.
Note
Note
If a new HDD is installed, it may require more time to be appeared the Live screen due to the
initialization time of a new HDD.
If the Live screen does not appear continuously or the LED in front repeats flickering, please
check the connection between inside and outside. If the system does not operate in normal,
contact with the shop where you bought the product.
The Live screen does not affect the earlier MENU setup. If you reboot the system
after power-off during recording, the Live screen will appear, accompanying recording.
Note
Note
If the Live screen dose not appear, check if the Video Out comes out in Composite mode or
VGA mode.
From the factory, the default mode is composite mode.
4-1
English
2

Live screen Mode

Definition of Live Screen Icon
The Live screen icons display the current setup and function status of each screen.
N PTZ
CAM_01
: Recording Icon
Each icon represents Normal / Event (Alarm + Motion) / Schedule Recording.
: Recording Video Size Icon
Each icon represents the recording size of Normal / CIF.
- Normal : Half D1 - (NTSC)720X240 (PAL) 720X288
- CIF : CIF - (NTSC)352X240 (PAL)352X288
: Recording lock icon
It indicates record lock while in record setup.
: PTZ Icon
PTZ
This icon appears when setting the PTZ device with the PTZ icon and changes to yellow color
when operating the PTZ.
: Audio Icon
This icon represents the Audio On/Off status and changes to yellow color at the Audio On. It
does not appear in the Video mode or Audio Disable.
: Sensor In Event Icon
This icon appears in the channel linked with the external sensor signal when entering the signal
at the Sensor On.
: Motion Event Icon
This icon appears in the Motion Event channel at the Motion Detection On.
: Zoom Icon
This icon appears while Zooming Out or Zooming In and disappears when canceling the Zoom
operation.
: Freeze Icon
This icon appears in the Freeze mode and disappears when canceling the Freeze.
: HDD Recording Disk Full Icon
Comes up when the HDD's space is insufficient when recording.
V.Loss
CAM_01
4-2
English