Screen Setup - Samsung SRD-476D User Manual

main menu
Monitor
You can configure information to be displayed and its format for Spot Out monitor.
Setting the Monitor
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Device> window to
move to <Monitor>, and press [ENTER] button.
2. Select <Monitor>.
3. Use direction buttons ( ◄ ►) to move to a desired item,
and set the value.
• Event Display : Sets the dwell time of the event channel
display on the monitor when an event occurs.
If selected <Continuous>, it displays the channel until you
press [ALARM] button to release it.
• Display : Displays only checked items on the monitor
screen.
• VGA/HDMI : Set your preferred screen resolution to <VGA> or <HDMI>.
• HDMI Resolution Auto Detection : If you set it to <ON>, then the HDMI screen resolution is automatically
detected.
If a HDMI monitor is not connected, the resolution is set to VGA/HDMI.
If <VGA> or <HDMI> is not supported by the monitor, it may not be able to display anything.
• Screen mode : Set screen mode.
• Sharpness : Set the clarity for the video screen.
4. When the monitor setup is done, press <OK>.

Screen Setup

Some monitors may not display information (camera name, icon, time information, etc.) about the DVR,
depending on the condition. Then, you can change the display position of the data.
1. In the <Device> window, press the up/down ( ) button to move to <Monitor> and press the [ENTER]
button.
2. Select the <Monitor> item.
3. Select <Display Position Setup> in the bottom.
You will move to the <Display Position Setup> window.
4. Use the four direction buttons or the number buttons on
the front panel or the remote control to adjust the data
position.
50_ main menu
Monitor
Monitor
Spot Out Mode
 Event Display
OFF
 Display
Date Time CH Name
 VGA/HDMI
1280X1024
 HDMI Resolution Auto Detection
ON
 Screen mode
Clear screen
 Sharpness
Level3 (High)
Display Position Setup
OK Cancel
2014-01-01 01:10:25
Display Position Setup
30
30
30
OK Cancel
CAM 03
Icon
30