Connecting Other Equipment To Your Dhr; Using The Tv Button On The Remote Control - Samsung DVD-H40 User Manual

Connecting Other Equipment to Your DHR

You can connect other audio and/or video equipment to your
The following illustrations give a few examples of the connection possibilities.
The RCA input/output connectors on the rear of the
camcorders, VCRs or sound systems.
REAR OF THE DHR
20
DHR in different ways.
DHR
are used for equipment, such as
Camcorder
VCR/DVD
Sound system

Using the TV Button on the Remote Control

Your DHR remote control will work with Samsung televisions and
compatible brands.
To determine whether your television is compatible, follow the instructions
below.
1 Switch your television on.
2
Point the remote control towards the television.
3 Hold down the TV button and enter the two-figure code corresponding
to the brand of your television, by pressing the appropriate
numeric buttons.
Brand Codes Brand
SAMSUNG 01 to 06 PHILIPS
AKAI 09, 23 SABA
GRUNDIG 09, 17, 21 SONY
LOEWE 02 THOMSON
PANASONIC 08, 23 to 27 TOSHIBA
• If your television is compatible with the remote control, it will be
switched off. It is now programmed to operate with the remote control.
If several codes are indicated for your television brand,
try each one in turn until you find one that works.
When you change the batteries in the remote control,
you must reprogram the code, following the same procedure.
You can control the television using the following buttons.
Button Function
STANDBY/ON Used to switch the television on and off.
INPUT SEL. Used to select an external source.
VOL. + or - Used to adjust the volume of the television.
PROG. Up or Down Used to select the required channel.
TV MUTE Used to toggle the sound on and off.
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
Codes
02, 20, 22
13, 14, 22 to 24
15, 16
13, 14, 24
07, 16 to 19, 21
21
3