Documents That Can Be Placed On The Original Glass; Precautions For Positioning Documents On The Original Glass - Konica Minolta bizhub C250 User Manual

Copy operations

Hide thumbs Also See for bizhub C250:

Table of Contents

Documents that can be placed on the original glass

To copy documents that cannot be loaded into the ADF, position them on

the original glass.

Document type

Document size

Maximum weight

Observe the following precautions when placing the document on the origi-

- The size of documents printed on paper in metric sizes (such as A3, B4,

A4) cannot be automatically detected. The setting must be specified by

the technical representative. For details, contact the technical represent-

- If a document of non-standard paper size is loaded, the "Auto Paper Se-

lect" and "Auto Zoom" settings cannot be used since the document size

cannot be detected automatically. If a document of non-standard paper

size is loaded, select the size of the paper to be copied.

- If highly translucent or transparent documents, such as overhead trans-

parencies or diazo photosensitive paper, are loaded, the document size

cannot be detected automatically. Place a blank sheet of paper of the

same size over the document.

- Do not place objects exceeding 4-1/2 lb on the original glass, otherwise

the original glass may be damaged.

- If a book is placed on the original glass, do not press it down extremely

hard, otherwise the original glass may be damaged.

Copy paper/original documents

Original Glass Documents

Sheets, books (spreads), three-dimensional objects

11 × 17 w to 5-1/2 × 8-1/2 w

A3 w to A5 w

Show Quick Links

Table of Contents