Changing Magnification Ratio - Konica Minolta BIZHUB PRO C6500E User Manual

Basic job settings
6.4.2

Changing magnification ratio

The following four modes are provided.
- Zoom (proportional): 0.250 to 4.000 in 0.001 (0.1%) increments
- Zoom (individual): Vertical and horizontal zoom ratios can be specified
individually within the range from 0.250 to 4.000 in 0.001 (0.1%)
increments.
- Enlarge/Reduce: Select one from the eight ratios (0.500, 0.707, 0.816,
0.866, 1.154, 1.224, 1.414, 2.000) provided on the screen.
- Set Zoom: Select one from the three ratios previously programmed.
!
Detail
The Enlarge/Reduce and Set Zoom ratio setting is described on
page 16-22 and page 16-39.
1
Touch [Zoom] on the Copy screen.
2
Specify the desired magnification.
– Zoom (proportional):
Touch to highlight the proportional zoom key at the upper left
corner in the Zoom area.
Then, use the screen keypad to enter the desired magnification
ratio. The entered ratio will be displayed on the screen.
If wrong number is entered, continue by entering the correct
number.
Touching arrow keys [+] and [,] will change the ratio in 0.001
(0.1%) steps.
bizhub PRO C6500 / bizhub PRO C6500e
6
6-29