Job Operation On Job List Screen; To Check/Control Reserved Jobs - Konica Minolta BIZHUB PRO C6500E User Manual

11
11.2

Job operation on job list screen

This section describes how to check and operate the jobs on the Job List
screen.

11.2.1 To check/control reserved jobs

Use this function to display all the reserve jobs as a list.
The list includes following information.
- Job No.: consecutive numbers of both copy and print jobs
- User Name: user who transmitted the job
- Mode: Copy or Printer
- Status: Printing or Reserved (current status of the job)
- Sheets: max. 4-digit page count
- Sets: max. 4-digit set count
- Pages To Go: max. 4-digit pages to be output (Sheets e Sets = Pages To
Go)
- Minute(s): time required for completing each job (minute)
Follow the procedure below to check the settings, change the output order,
and suspend/delete/stop reserved jobs.
1
Touch [JOB LIST] tab on the Copy screen, then touch [Reserved Job]
if not highlighted.
2
Check the status of the reserved jobs.
– Touch [Next] to scroll, if 8 or more jobs are entered.
3
Select the desired job, then select the job operation.
11-4 bizhub PRO C6500 / bizhub PRO C6500e
Job management