Konica Minolta BIZHUB PRO C6500E User Manual page 398

8
5
Select the side of copy paper to be adjusted with image position.
– Touch [Front] or [Back] to highlight it.
– Auto Zoom will automatically determine the reduction ratio
according to the shift amount specified for the front page. Setting
for the back page is not required normally because the shift amount
and reduction ratio determined for the front page will be
automatically applied to the back page.
6
Specify the shift direction and amount.
– Use [Top] or [Bottom] to shift the image in lengthwise direction, and
[Right] or [left] in widthwise direction. Touch the desired shift
direction key to highlight it, then use [,] and [+], or touch panel
keypad to enter the desired shift amount.
– Setting the shift amount in 0.1 mm increments is also available in
the Utility mode.
7
Repeat the steps 5 and 6, if setting the shift amount for front and back
sides individually.
8
Touch [OK] to complete the setting.
– To restore the previous setting, touch [Cancel].
– To release the Page Margin function with the current setting
remained, touch [Function Off].
9
Touch [OK] on the Application screen.
The Copy screen will be restored, with highlighted [Page Margin] key
displayed under the [Application] key.
Use this key to jump to the subsequent screen to make any setting
change.
10
Enter the desired print quantity from the control panel keypad, then
press [Start].
The machine will start printing when ready for output.
8-68 bizhub PRO C6500 / bizhub PRO C6500e
Application functions