Table of Contents
Advertisement
5
5.6
To stop scanning/printing
This section describes how to stop the job currently in process (scanning,
printing, or both of scanning and printing).
To stop scanning/printing
0 This procedure is effective only for the job in progress. To stop reserved
jobs on standby, operate on the Job List screen. See Section 14 for
details.
1
Press [Stop] on the control panel
while the current job is in progress.
–
With the popup menu displayed
right after pressing [Start] for
scanning the original of reserve
job, the current job cannot be
canceled even if [Stop] is
pressed. According to the
procedure on page 5-31, touch
an appropriate key on the popup
menu to clear it.
The current machine operation of the selected job will be suspended,
and the popup menu will be displayed on the Copy screen.
2
Touch the desired key on the popup menu.
–
The popup menu will vary according to the job in progress.
5-26
bizhub PRO C6500 / bizhub PRO C6500e
Before making copies
Advertisement
Table of Contents
Troubleshooting
