Konica Minolta BIZHUB PRO C6500E User Manual page 377

Application functions
0 Scan the original from original glass. The ADF cannot be used to scan the
original.
0 Use the Size Manual Input mode to repeat a part of the original, not the
entire image, by specifying the scanning area.
0 Size Auto Detect mode uses Non-Image Area Erase to automatically
detect the original size with the ADF/original cover kept open.
1
Position original on the original glass.
– When selecting Size Manual Input, place the original facedown on
the original glass so that the original image should fit within the area
measured by vertical/horizontal width from the rear-left corner.
Close the ADF/original cover gently.
– When selecting Size Auto Detect, open the ADF/original cover, then
place the original facedown on the original glass.
In this case, Non-Image Area Erase is automatically selected. Be
sure to keep the ADF/original cover open.
2
Touch [Application] on the Copy screen.
3
Touch [Image Repeat] on the Application screen.
bizhub PRO C6500 / bizhub PRO C6500e
8
8-47