Konica Minolta BIZHUB PRO C6500E User Manual page 656

14
4
Load the desired size of paper to be adjusted on a tray, specify Tri-
Fold, then press [Start] on the control panel.
A sample pattern (No. 16) will be output.
5
Check the folding positions on the output sheet.
6
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Tri-Fold Adjustment Screen will be restored.
7
Touch the required size key.
8
Touch [+ 5 -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -128 (left) to +127 (right), 1 step = 0.1 mm
– If specified value is positive, the folding positions move to the right.
Or, if negative value is specified, the folding positions move to the
left.
9
Repeat steps 3 to 8 until the desired result is obtained.
14-96 bizhub PRO C6500 / bizhub PRO C6500e
Machine adjustment