Konica Minolta BIZHUB PRO C6500E User Manual page 652

14
4
Touch [COPY] tab.
The Copy Screen will be displayed.
5
Load the desired size of paper on the tray to be adjusted, specify
Punch, then press [Start] on the control panel.
A sample pattern (No. 16) will be output.
6
Check whether or not the punch position is skew on the output sheet.
7
If the desired result cannot be obtained, touch [ADJUSTMENT] tab.
The Registration Adjustment Screen will be restored.
8
Touch [+ 5 -] to specify the value to be positive or negative. Use the
touch panel keypad to enter the desired adjustment value, then touch
[<<SET].
Available range: -50 (wide) to +50 (narrow), 1 step = 0.1 mm
9
Repeat the adjustment steps from 3 to 8 until the desired result is
obtained.
14-92 bizhub PRO C6500 / bizhub PRO C6500e
Machine adjustment