Ricoh Container Stacker Unpacking & Setup Instructions page 35

Attach the Finisher to the Container Stacker
3. Fit the hooks on the Container Stacker installation plates (upper and lower) into
the upper and lower holes on the Finisher as illustrated below, then lock them by
pushing the Finisher to the back.
CAUTION
When installing the Finisher take care not to hit the part "A" against the
Printer.
M4x6 Screws
Upper view
Finisher
1-30 Container Stacker Installation Instructions
!
Holes
Container Stacker 2
Hooks
Lower view
Container Stacker 2
Finisher