Ricoh Container Stacker Unpacking & Setup Instructions page 32

5. Attach the Standard Finisher to the Container Stacker 2.
Container Stacker
Standard Finisher
M4 Screws
M4 Screws
6. Adjust the difference between the Stacker Paper Guide and the Printer Paper
Guide to 0 - 3 mm.
7. Verify the gap of A, B, C, and D are nearly equal. If not, adjust the leveling bolts.
Finisher Paper Guide
Container Stacker 2 Paper Guide
0 to 3 mm
Adjust the Parallel Gap
C
A
D
B
Loosen
Adjustment Bolt
Container Stacker Installation Instructions 1-27