Standard Finisher (92/184 Ppm) - Ricoh Container Stacker Unpacking & Setup Instructions

Standard Finisher (92/184 ppm)

1. Install the Joint Cover/U, Joint Cover/F, the Joint Cover/R, and the Main Fixed
Plate/1.
M4x6 Truss screw
6-M4x6 TP screws
Main Fixed Plate/ 1
Joint cover / R
Main Fixed Plate/ 1
2. Remove the Rear Covers from Printer, Container Stacker 2 and Finisher
NOTE
Refer to the "Standard Finisher Installation Instruction regarding
unpacking and installation of the Finisher.
Joint cover / F
:
Joint cover / U
Container Stacker Installation Instructions 1-29
Container Stacker 2