Ricoh Container Stacker Unpacking & Setup Instructions page 18

5. Install Joint Bracket (U) and Joint Bracket (L) using the two M4x8 screws.
Guide Plate (U)
Guide Plate (L)
Static Electricity Eliminator
M3x8 Screw
M3x8 Screw with Washer
M4x8 Screw
M4x8 Screw
Joint Bracket (L)
Joint Bracket (U)
6. Remove the six M4 screws. Unhook the lower hook of the Rear Cover and
remove the Rear Cover by lifting and pulling it forward.
Rear Cover
M4 Screws
Container Stacker Installation Instructions 1-13