Installation Of Container Stacker 2 And Container; Stacker 1 - Ricoh Container Stacker Unpacking & Setup Instructions

Installation of Container Stacker 2 and Container

Stacker 1

1. Remove the two M3x8 Screws and Static Electricity eliminator from the Printer.
NOTE
Refer to page 9 for installation of the Printer and the Container Stacker 2.
2. Attach the Guide Plate (U) with the Static Electricity eliminator using the two
M3x8 Screws.
3. Install Joint Bracket (U) and Joint Bracket (L) using the two M4x8 Screws.
Guide Plate
M3 Screw
Joint Bracket U
M4x8 Screw
:
Static Electricity Eliminator
Container Stacker 2
Joint Bracket L
Container Stacker Installation Instructions 1-21