Table of Contents
Advertisement
Starting the Copy Cycle
Exposure
Lighter
Starting the Copy Cycle
Stopping a Multi-Copy Cycle
Stop
123
Auto
Zoom
Paper
Darker
x0.5~x2.0
A
Reduce Full size Enlarge
Auto
Select
A
1139O2360A
1139O2360A
1139O2592A
1139O2592A
2. Basic Copying Procedure
1
2
3
4
5
6
7
8
9
0
C
1
Check the control panel to make
sure that you have set up your
copy job correctly.
2
Press the Start Key, if it is green.
The Start Key turns orange when
the copy cycle starts.
In a multi-copy cycle, the
number on the Multi-Copy
Display is decreased by 1 each
time a copy is fed out of the
copier. The Display is reset to
the original setting as soon as the
multi-copy cycle is completed.
To stop a multi-copy cycle in
progress, press the Stop Key.
The message "Copy Job has been
canceled." appears on the
Message Display and the Start
Key soon turns green. Then, the
copier stops. The Multi-Copy
Display shows the number of
copies yet to be made.
67
1136P273DA
Advertisement
Table of Contents
