Supplementary Function Setting - Minolta EP2050 Operator's Manual

98

6. Supplementary Function Setting

Erase Mode
Job
Memory
Input
Meter
Count
OHP
Inter-
leaving
Page
Insertion
Toner
Book 1
Book 2
Drum
Dehumidify
Display
Original
2-Sided
Original
Zoom
Auto Size
Memory
Cover Erase 1
(Front)
Erase 2
Cover
(Front Back)
&
Margin 1 Erase 3
Margin 2 Erase 4
OK
1136P330CA
1136P330CA
Copy
1136P213AA
1136P213AA
1-Sided
Copies
1136P214AA
1136P214AA
The copier provides a margin of a set width
along the four edges, one edge, or at the
center to erase shadows or other unwanted
images.
One of four different functions can be
selected. Use the one that is most suited to
your need.
Erase 1 <Punch Hole Erase I>
The copier erases an area of the
original equivalent to a given margin
from the trailing edge of the copy,
thereby eliminating shadows that
could otherwise be produced on the
copy if it is made from an original
having punch holes or staples.
The erase width can be selected from
among 10 mm 15 mm and 20 mm.
Erase 2 <Punch Hole Erase II>
The copier erases the rear margin area
to prevent shadows from being
produced even if 2-sided originals of
a landscape format with punch holes
are fed through the AFR-7.
The erase width is 10 mm.