Selecting The Finishing Mode - Minolta EP2050 Operator's Manual

90
4. System Job Setting

Selecting the Finishing Mode

Using the Manual Staple Mode
Manual
NOTE
The capacity of each Sorter Bin is 50 copies for the S-205 and ST-206 and 25
for the S-104 and ST-101.
1139O3400A
Sort
Sort
Hole
Staple Punch
Group
Finishing
1136P322CA
1136P322CA
Staple
1139O2732A
1139O2732A
If this capacity is exceeded, the Remove Copies
Indicator lights up on the control panel and the
Start Key turns orange, inhibiting the initiation of a
new copy cycle.
Selecting the Sort, Sort-and-Staple,
Group, or Hole Punch Mode
Press the Finishing Mode Select Key
or Hole Punch Mode Key to select the
desired mode.
Each time the Key is pressed, the
*
newly selected indicator lights.
To staple copies after they have been
made:
Make sure that each copy set or
stack has been fed into the Sorter
Bin. Then, press the Manual
Staple Key. Then the copy set or
stack in the Sorter Bin will be
stapled.