Table of Contents
Advertisement
182
2. Detailed Instructions for Messages/Indicator Lights
Call-Technical-Representative Indicator
When a malfunction occurs in the copier, the Call-Technical-Representative
Indicator lights up and the warning message as shown above appears on the
Message Display showing the corresponding malfunction code. At the same
time, the Start Key turns orange and you cannot start any new copy cycle. When
this happens, try to clear the Call-Technical-Representative Indicator by
following the instructions below.
Resetting the Call-Tech.-Rep. Indicator/Warning Message
NOTE
When calling your Technical-Representative, give him or her the malfunction
code shown on the Message Display.
<Example>
Call your
Technical Rep. :
Call your
AUTO
Technical Rep. :
1139O0760A
Code : C0610
1136P372CA
1136P372CA
123
Code : C0610
1136P371CA
1136P371CA
Swing down the Front Door, then
close it. This resets the
Call-Technical-Representative
Indicator as well as the warning
message.
If the
Call-Technical-Representative
Indicator lights up again, call
your Technical-
Representative immediately.
This is malfunction code
C0610.
Advertisement
Table of Contents
