Erase - Minolta EP2050 Operator's Manual

Loading the Originals in Erase Mode
Erase Mode

Erase 1

Punch Hole
Erase I
Erase edge on the right.
Erase 2
Punch Hole
Erase II
Erase edge in the rear.
Erase 3
Frame Erase
Edges aligned with Original
Scales.
Erase 4
Center
Erase
Place original lengthwise in
alignment with Original Scales.
Lengthwise
NOTE
The erase width represents that on the copy, not on the original.
Example: Erasing the center of an A4 book original on a copy reduced by 50%
Book
Original (A4)
20 mm
On Original Glass
1136O116AA
1136O119AA
p. xi
Copy (A5)
If you want to erase the 20-mm-wide
center margin on the original, that is
reduced to 10 mm on the copy, select 10
0.5
mm for the erase width.
10 mm
1136P217AA
1136P217AA
6. Supplementary Function Setting
Using AF-3/AFR-7
Erase edge on the left.
1136O117AA
Erase edge in the rear.
1136O118AA
Originals positioned on the
Document Feed Tray.
Place original lengthwise and
slide Document Guide Plate up
against the edge of original.
Lengthwise
101
1136O120AA
1136O121AA
1136O122AA
1136O123AA
p. xi