Table of Contents
Advertisement
4
2. Precautions for Use
Operating Environment
The operating environmental requirements of the copier are as follows.
Temperature
: 10°C to 30°C (50°F to 86°F) with a fluctuation of 10°C (50°F) per hour
Humidity
: 15% to 85% with a fluctuation of 20% per hour
Using the Copier Properly
To ensure the optimum performance of the copier, follow the precautions listed
below.
NEVER place a heavy object on the copier or subject the copier to shocks.
NEVER open any Doors, or turn OFF the copier while the copier is making
copies.
NEVER bring any magnetized object or use flammable sprays near the copier.
NEVER place a vase or vessel containing water on the copier.
NEVER drop paper clips, staples, or other small pieces of metal into the copier.
NEVER attempt to remove any Cover that is secured.
ALWAYS insert the Power Plug all the way into the outlet.
ALWAYS make sure that the outlet is visible, clear of the copier or copier
cabinet.
ALWAYS ensure that the copier does not ride on the power cord or
communications cable of other electrical equipment, and it does not get such a
cord or cable wedged into its own mechanism.
NEVER leave a damaged or cracked copier power cord unattended. If you find
any of these conditions, immediately shut down the copier, unplug the power
cord, and call your Technical Representative for appropriate action.
ALWAYS provide good ventilation when making a large number of continuous
copies.
NEVER leave the copier running when it becomes inordinately hot or produces
abnormal noise. If that happens, immediately turn OFF the copier, unplug it,
and then call your Technical Representative.
NOTE
= Locate the Copier in a Well Ventilated Room =
A negligible amount of ozone is generated during normal operation of this
copier. An unpleasant odor may, however, be created in poorly ventilated
rooms during extensive copier operations. For a comfortable, healthy, and
safe operating environment, it is recommended that the room be well
ventilated.
Advertisement
Table of Contents
