Basic Copying Overview - Minolta EP3050 Operator's Manual

30

1. Basic Copying Overview

Place the original in position (step 1), set the number of copies to be made (step 8), and press the
Start Key (step 9). This will allow you to make a full-size copy or copies on paper of the same size
as the original.
Note: Automatically selected in the initial mode are Auto Paper, full size, and Auto Exposure.
The selections you make on the Touch Panel will change the exposure level, zoom ratio, the
type of copy and so on.
1. Placing the Original
Load the originals face up on the AFR-9.
To change the copy paper
size
To change the zoom ratio
To change the exposure
level
To make a 1-sided copy
To save the copy paper
p. 32
1139O0210A
Selecting the basic functions
2. Touch Paper.
p. 42
3. Touch Zoom.
p. 44
4. Touch Exposure.
p. 47
Selecting the original
5. Touch Orig. Copy.
p. 48
Raise the Original Cover and place the
original face down on the Original Glass.
Auxiliary Finishing
Ready to copy.
Auto Expo. x1.000
Exposure Zoom
copy type
Auxiliary Finishing
Ready to copy.
Auto Expo. x1.000
Exposure Zoom
1139O0200A
Orig. Copy
Basics
1
Auto Paper
Paper
1134P488CA
Orig. Copy
Basics
1
Auto Paper
Paper
1134P488CA