Basic Copying Overview - Minolta Di250 Operator's Manual

3-2

1. Basic Copying Overview

Basic Copying Overview
One of the most basic copying jobs is to make full-size (
• Place the original in position (step 1), set the number of copies to be made (step 8), and press the Start
key (step 9). This will allow you to make full-size copies on paper of the same size as the original.
(*Automatically selected in the initial mode are Auto Paper, Full Size, and Auto Exposure.)
The selections you make on the Touch Panel will change the exposure level, zoom ratio, the type of
copy and so on.
1. Placing the Original
• Load the originals face up on the document
feeder. p. 2-19
To change the copy paper size
To change the zoom ratio
• To sort copies
• To staple copies
• To punch holes in copies
• To make copies from a book
• To save copy paper
• To change the exposure level
×
1.000) copies of the original.
• Raise the document feeder and place the original
face down on the Original Glass.
2$%
Selecting the basic functions
Paper
2. Touch .
p. 3-4
Zoom
3. Touch .
p. 3-10
Finishing
4. Touch .
p. 3-16
Selecting the original
5. Touch Orig. Copy
p. 3-22
Selecting the exposure level
6. Touch Density .
p. 3-32
copy type
.
p. 2-22
2$$
3(%
3&&
3&&