Basic Copying Overview - Minolta EP6000 Operator's Manual

28

1. Basic Copying Overview

•
Place the original in position (step 1), set the number of copies to be made (step 8), and press the
Start Key (step 9). This will allow you to make a full-size copy or copies on paper of the same size
as the original.
Note: Automatically selected in the initial mode are Auto Paper, full size, and Auto Exposure.
•
The selections you make on the Touch Panel will change the exposure level, zoom ratio, the
type of copy and so on.
1. Placing the Original
•
Load the originals face up on the AFR-9.
To change the copy paper
size
To change the zoom ratio
To change the exposure
level
• To make a 1-sided copy
• To save the copy paper
➭
p. 30
1139O0210A
Selecting the basic functions
2. Touch Paper.
➭
p. 40
3. Touch Zoom.
➭
p. 42
4. Touch Exposure.
➭ p. 45
Selecting the original
5. Touch Orig. Copy.
➭
p. 46
•
Raise the Original Cover and place the
original face down on the Original Glass.
Auxiliary Finishing
Ready to copy.
Auto Expo. x1.000
Exposure Zoom
copy type
Auxiliary Finishing
Ready to copy.
Auto Expo. x1.000
Exposure Zoom
1075O015AA
Orig. Copy
Basics
1
Auto Paper
Paper
1075O270CA
1075O270CA
Orig. Copy
Basics
1
Auto Paper
Paper
1075O270CA
1075O270CA