Table of Contents
Advertisement
Misfeed Clearing Procedures
Copier (Fusing/Transport Section)
NOTE
Be careful not to touch the areas
marked with
Caution: HOT with bare hands.
Open the Front Door. Turn the Lock
1
Release Lever counterclockwise to
unlock and swing up the Upper Half of
the copier. Then lock Stopper M2 .
Holding up the Fusing Unit, pull out
2
the sheet of paper in the direction o
the arrow.
CAUTION : HOT
The Fusing Unit and its surrounding
areas may be extremely hot. DO NOT
touch any part except the Fusing Unit
Handle (yellow).
High Voltage and
1151O113AA
5.
When the Misfeed Indicator Lights Up
Remove any sheet of paper from the
3
Transport Section.
Slightly lift up the Upper Half of the
4
copier and unlock Stopper M2 .
Gently swing down and lock the Upper
Half of the copier. Then, close the Front
Door.
69
1151O144AB
Advertisement
Table of Contents
