Changing The Staple Cartridge; 10-Bin Sorter - Minolta EP3010 Manual

Initial Steps . . .
4.12

Changing the Staple Cartridge

10-Bin Sorter

Do not change Cartridge unless a message is shown on the display that
the Staple Cartridge is empty.
Press the Lock Release Lever on
1
the Staple Sorter and pull the Sorter
off the copier.
2 Open the Stapler door.
Press the green button upwards
3
and pull out the empty Staple
Cartridge.
4 Pull the staple belt about 3 cm out of
the new Staple Cartridge. Break this
piece off so that it no longer extends
past the end of the Staple Cartridge.
Rev. /
4
Lock Release Lever
Stapler door
4-17