Deleting Copy Job Programs - Minolta EP3010 Manual

6
6.3

Deleting Copy Job Programs

Delete a stored copy job program.
1 Touch the User Mode box on the Control Panel.
The display will change.
Touch the [Job Memory Input] box.
2
The display will change.
3 Touch the [Delete] box, followed by
a Program Memory Box (from [1] to
[10]) to store your settings at the
selected program location.
or
Touch the [Account Job] box to
display supplementary program
locations for your access number.
4 Touch the [Exit] box to confirm your program location inputs.
6-4
User Mode Settings
free program location
occupied program location
Rev. /