Initial Steps . . .
20-Bin Sorter
Do not change cartridge unless a message is shown on the display that
the Staple Cartridge is empty.
1
Press the Lock Release Lever on
the Staple Sorter and pull the Sorter
off the copier.
2
Open the Stapler door.
Press the green button down and
3
pull out the empty Staple Cartridge.
Pull the staple belt about 3 cm out of
4
the new Staple Cartridge. Break this
piece off so that it no longer extends
past the end of the Staple Cartridge.
Rev. /
4
Lock Release Lever
Stapler door
4-19