Floppy Disk Drive; Track Magnetic Tape Drive; Track Cartridge Tape Drive; Feeder Stacker - Xerox DocuPrint 180 Product Manual

XEROX DOCUPRINT 180 LPS OVERVIEW
Options

Floppy disk drive

9-track magnetic tape drive

36-track cartridge tape drive

Feeder stacker

1-4
The following options are available to further enhance the capabilities
of your Xerox DocuPrint 180 LPS.
Note: For detailed information regarding these options, please
contact your sales representative.
The floppy disk drive is located in the system controller, to the right
of the 1/4 inch cartridge tape drive. It allows you to transfer files
between a floppy disk and the system controller's hard disk.
Therefore, it provides an alternative way for backing up and restoring
system controller rigid disk files.
The 9-track (1600/6250) magnetic tape drive is an alternative or
additional offline capability to the 18 or 36-track cartridge tape drive
for inputting print and nonprint data to the Xerox DocuPrint 180 LPS.
(Refer to figure 3-5.)
Refer to Xerox DocuPrint 180 LPS Operator Guide and to the Xerox
LPS Tape Formats Manual for additional information
The 36-track cartridge tape drive is an alternative or additional offline
capability to the 9-track magnetic tape drive for inputting print and
nonprint data to the Xerox DocuPrint 180 LPS. It reads 18 and 36-
track and writes 36-track IBM- and ANSI-compatible half-inch tape in
the 36-track IBM 3480/3490 data format.
Refer to the Xerox DocuPrint 180 LPS Operator Guide and to the
Xerox LPS Tape Formats Manual for additional information.
The DocuPrint 180 LPS has an Inverter Feeder Stacker, and up to
three optional feeder stackers.
Refer to the section "Printer components" in the "DocuPrint 180 LPS
overview" chapter for information on the feeder stackers.
XEROX DOCUPRINT 180 LASER PRINTING SYSTEM PRODUCT GUIDE