Reviewing Or Cancelling Delayed Commands - Konica Minolta 5600 Operator's Manual

Beyond the basics

Reviewing or cancelling delayed commands

If you've stored a delayed command in your fax machine, it will hold it in memory
until it either completes the command successfully or reaches its maximum number
of redial attempts (see pages 1.16–1.17). Your machine can store up to 99 delayed
commands. It identifies each by a two-digit command number ranging from 01 to 99.
To see your machine's stored commands or to cancel them:
1
Press
REVIEW COMMANDS
• If there are no stored commands in your machine — It beeps briefly
and displays "No Command" on the
• If there are commands in your machine's memory, the
C01:9-5552311
Program/Cancel
Here, you see command 01, followed by the number it's set to dial. If the com-
mand is to send a broadcast, "Broadcast" appears instead of the phone
number. (See "Broadcasting," page 2.16.)
If the command is to send a batch transmission, the
number (such as "B01") rather than the command number. (See "Batch trans-
mission," pages 2.20–2.23.)
If the command is for a continuous polling operation, the
uous polling operation number (such as "P01") rather than the command
number. (See "Polling," on pages 2.29–2.31.)
Note: If your machine is attempting to perform a command now, it appears
on the display.
2
Press / or
PROGRAM
3
If you want to cancel the command shown, press
C01:9-5552311
Check Program/Cancel
4
To keep this command but to continue reviewing stored commands, press
/ . Go back to step 2.
PROGRAM
To keep this command and stop reviewing commands, press
your machine to standby mode.
To go ahead with cancelling the command, press
step 2 to view other delayed commands.
Note: See also "Reviewing or cancelling parts of a broadcast," next column.
2.18
.
. It then returns to standby mode.
LCD
LCD
shows its batch box
LCD
LCD
to scroll through currently stored commands.
. The
CANCEL
again. Go back to
CANCEL
Reviewing or cancelling parts of a broadcast
You also can review or cancel certain numbers within a broadcast:
1
Press
2
Press
Note: Stop this operation at any time by pressing
3
If you want to cancel the command shown, press
If you want to review individual numbers within this broadcast, go on to
step 4 without pressing
shows:
4
To review individual numbers within this broadcast, press
the first number. The
9-5550388
5
Press
6
Press
If you want to cancel this number, also, repeat this step.
If you want to cancel a different number, go back to step 5.
If you don't want to cancel any more numbers, press
shows its contin-
returns to standby mode.
shows:
LCD
to return
STOP
.
REVIEW COMMANDS
/ or to scroll through currently stored commands.
PROGRAM
.
CANCEL
shows:
LCD
Program/Cancel
/ or until you find the number you want to cancel.
PROGRAM
, . The next number will appear.
CANCEL CANCEL
.
STOP
, .
CANCEL CANCEL
to see
BROADCAST
. The machine
STOP