Table of Contents
Advertisement
Setting silent mode
Silent mode allows you to mute the ringer, the alarm and the key tones.
• Ringer — Even if you turn the ringer off in silent mode, a special ring alerts you
if you receive a voice call and a call request. This allows you to continue to use
your fax as a phone, if necessary.
• Alarm — If you disable the alarm in silent mode, the sound your machine
makes when an error occurs and the beep your machine makes after sending or
receiving a fax or making a copy cannot be heard.
• Key tone — If you mute the key tone, your machine will not make a sound when
you press the buttons on the control panel.
Note: Silent mode mutes the ringer as well as the beep and the key tones. If you're
using your fax machine as both a fax and phone (with the handset), you may
not want to use this feature.
1
Press /
,
, 1, 5,
PROGRAM
J
ENTER
Silent Mode:
Off
Program/Enter
2
Press
or /
until the mode you want appears.
PROGRAM
In this example, we've chosen On.
Silent Mode:
On
Program/Enter
Note: If silent mode is On, the machine will be quiet.
If silent mode is Off, the machine will ring and beep as usual.
Note: If you chose Off in step 2, skip to step 10.
3
Press
to save the setting. The
ENTER
on or off:
Ringer Silent:
Off
Program/Enter
4
Press
or /
until the mode you want appears.
PROGRAM
If you want to turn off the ringer, select "On" and the machine will be quiet.
Otherwise, the machine will ring.
5
Press
to save the setting. The
ENTER
on or off:
Alarm Silent:
Off
Program/Enter
. The
shows your fax's current setting:
LCD
now asks if you want the ringer to be
LCD
now asks if you want the alarm turned
LCD
6
Press
or /
until the mode you want appears.
PROGRAM
If you want to turn off the alarm, select "On" and the machine will be quiet.
Otherwise, the machine will beep.
7
Press
to save the setting. The
ENTER
or off:
Key Buz.Silent: Off
Program/Enter
8
Press
or /
until the mode you want appears.
PROGRAM
If you want to turn off the tones, select "On" and the machine will be quiet.
Otherwise, the machine will beep when the keys are pressed.
9
Press
to save the setting.
ENTER
If you turned off the alarm or the key tones in the steps above, your machine
gives you the option of setting the volume for the alarm and key tones. If this
option appears, skip to step 10.
If you didn't turn any of these off, your fax machine returns to standby mode.
10
The
shows your fax's current setting:
LCD
Alarm&Key Vol.: Mid
Program/Enter
11
Press
or /
until the mode you want appears.
PROGRAM
Below are the possible settings:
Alarm&Key Vol.: Max
Program/Enter
Alarm&Key Vol.: Mid
Program/Enter
Alarm&Key Vol.: Min
Program/Enter
12
Press
to save the setting.
ENTER
Beyond the basics
now asks if you want the key tones on
LCD
= Loudest setting.
= Medium setting.
= Low setting.
2.5
Advertisement
Table of Contents
