Programming A Batch Transmission - Konica Minolta 5600 Operator's Manual

8
Next, while you can still see the fax number on the
twice and then press .
ENTER
9
If you want the polling to begin immediately every time you press the key,
press and skip to step 12.
ENTER
If you want to delay the polling, press
10
Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Delayed
Enter Time: 30/17:05
Option 2: Perform the command at a certain time each day you press the
key. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter 0, 0 and
then the time the fax should perform the command:
Delayed
Enter Time: 00/17:05
11
Press , .
ENTER ENTER
12
The now displays the next programmable one-touch key.
LCD
If you do not want to enter or change any other key's programming, press
Your machine returns to standby mode.
If you do want to enter or change this key's programming, go back to step 4.
If you want to enter or change another key's programming, go back to step 2.
, press -
LCD COM OPTIONS
- , .
COM OPTIONS ENTER
on the 30th.")
PM
today.")
PM
STOP

Programming a batch transmission

For this operation to work, two things must be true:
• The batch box you're using must exist on your fax machine.
• You must know the batch box's identifier number (1–5).
To program a batch transmission into a programmable one-touch key:
1
Press / , , 1,
PROGRAM C
one-touch number available:
Select Program No.
65:No Number Stored
Note: If a programmable one-touch number other than 65 appears on the
, it means that you have already entered a number for 65.
LCD
Note: To erase a programmable one-touch key, refer to page 2.57.
2
Press the key that you want to program or change. Here, we've selected 67.
Select Program No.
67:No Number Stored
Note: If your previous command for this key was for a batch transmission
and you want to keep this key programmed for a batch transmission,
use these instructions to make changes. But if you want to assign this
key to a completely different operation (for a delayed transmission, for
example), then you first must erase the stored command before pro-
gramming the new one.
.
3
If you want to select a different programmable one-touch key than the one
that appears on the
LCD
4
Press . The
ENTER LCD
the programmable one-touch:
67: Type: Comm.
Program/Enter
Note: If changing a previously stored command, skip to step 7.
5
Press / until "Comm." appears.
PROGRAM
67: Type: Comm.
Program/Enter
6
Press . The
ENTER LCD
67:Fax#/Com-Options
_
. The shows the first empty programmable
ENTER LCD
, press that key now.
asks for the type of operation you want to program into
now shows either
67:Fax#/Com-Options
or
9-5558743_
Beyond the basics
2.49