:PULS:HOLD[1]
[:SOURce]:PULSe:HOLD[1]
Set & Query
WIDTh | DCYCle | TDELay
WIDTh
Use this command to set whether the pulse width, the pulse duty cycle or
the pulse trailing edge delay is held constant when the pulse period is
changed.
To set and hold the delay and the duty cycle:
:PULS:DEL:HOLD TIME
:PULS:DEL 20NS
:PULS:HOLD DCYC
:PULS:DCYC 25PCT
:PULS:PER
[:SOURce]:PULSe:PERiod
Set & Query
Numeric
S with engineering prefixes.
Frequency =
Period
1
S
2 ns to 999.5 s
Use this command to set/read the pulse period. Select the pulse period
source using :TRIGger:SOURce. The currently selected source is
programmed by this command. Note that the specified limits and
available resolution depend on the selected source.
62
Hold OUTPUT delay fixed when frequency
varies
Set OUTPUT delay to 20ns
Hold OUTPUT duty cycle fixed when frequen-
cy varies
Set OUTPUT duty cycle to 25%
1