Table of Contents
Advertisement
:PULS:DEL[1]:UNIT
[:SOURce]:PULSe:DELay[1]:UNIT
Set & Query
S | SEC | PCT | DEG | RAD
S
Use this command to set/read the default units for the pulse delay
parameter. The default unit of a parameter is the unit used when the
parameter is programmed to a value without a unit suffix.
To set the pulse delay to 50% of period:
:PULS:DEL:UNIT PCT
:PULS:DEL 50
:PULS:DOUB[1]
[:SOURce]:PULSe:DOUBle[1][:STATe]
Set & Query
OFF | ON
OFF
Use this command to switch double-pulse mode on or off. In double-
pulse mode two pulses are generated per pulse period. The delay
between the leading edges of the first and second pulse can be adjusted.
Set OUTPUT delay unit to %
Set OUTPUT delay to 50% of period
59
Hide quick links:
Advertisement
Table of Contents
