Agilent Technologies 81101A Reference Manual page 10

This book uses certain conventions to indicate elements of the
Agilent 81101A's user interface. The following table shows some
examples:
Softkeys
Hardkeys
Alternate Keys
Screen Quotes
Entry Focus
:VOLTage:HIGH 3V Full command for programming a 3 V high level.
*RST
10
Press the
Trigger screen.
Press the key to switch to the alternative
softkey layout.
Press
The alternate key label—which is selected by
pressing the key—is given in parentheses.
Move the entry focus down to P
turn the knob to select
The highlight field, that can be moved with the
cursor keys, to change modes, parameters, or
parameter formats.
The upper case letters represent the short form
of the command, which results in faster pro-
gramming times.
Common IEE 488 command, to reset instrument
to default status.
softkey to access the Mode/
to switch on the output.
-P
ULSE ERIOD
PLL.
INTERNAL
and