Using Web Config Network Configuration Software; About Web Config; Accessing Web Config - Epson WorkForce WF-3640 Administrator's Manual

Using Web Config Network Configuration Software

Follow the instructions in these sections to configure your product's adminstrator network settings using
the Web Config software.
Note: Before you can configure system administration settings, connect the product to a network. See
the product's Start Here sheet and User's Guide for instructions.

About Web Config

Accessing Web Config

Restricting Features Available for Users
Using Your Product on a Secure Network
About Web Config
Web Config is a browser-based application you can use to configure a product's settings. Basic and
advanced setting pages are available.
Note: Before you can configure system administration settings, connect the product to a network. See
the product's Start Here sheet and User's Guide for instructions.
You can lock the settings you select by setting up an administrator password for your product. See the
product's User's Guide for instructions.
Parent topic:
Accessing Web Config
You can access Web Config from your browser using HTTP or HTTPS.
By default, you access Web Config for the first time using HTTP. If you continue to use HTTP, Web
Config does not display all available menus.
1. Print a network status sheet for your product and identify the product IP address. See the product's
User's Guide for instructions.
2. Start your web browser and make sure JavaScript is enabled.
3. Type the product IP address into the browser as follows, depending on the protocol you are using:
• IPv4: http://product IP address
Using Web Config Network Configuration Software
8