GS716Tv2 and GS724Tv3 Software Administration Manual
1.
Use the
MAC ACL
2.
Use the
MAC Rules
3.
Use the
MAC Binding Configuration
4.
Optionally, use the
To display the MAC ACL page, click Security ACL. The MAC ACL page is under the Basic
link.
The MAC ACL table displays the number of ACLs currently configured in the switch and the
maximum number of ACLs that can be configured. The current size is equal to the number of
configured IPv4 ACLs plus the number of configured MAC ACLs.
To configure a MAC ACL:
1.
To add a MAC ACL, specify a name for the MAC ACL in the Name field, and click Add.
The name string may include alphabetic, numeric, dash, underscore, or space
characters only. The name must start with an alphabetic character.
Each configured ACL displays the following information:
•
Rules. Displays the number of rules currently configured for the MAC ACL.
•
Direction. Displays the direction of packet traffic affected by the MAC ACL, which can
be Inbound or blank.
2.
To delete a MAC ACL, select the check box next to the Name field, then click Delete.
3.
To change the name of a MAC ACL, select the check box next to the Name field, update the
name, then click Apply.
4.
Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
page to create the ACL ID.
page to create rules for the ACL.
page to assign the ACL by its ID number to a port.
MAC Binding Table
page to view the configurations.
Chapter 5: Managing Device Security
| 185