NETGEAR GS716T Software Administration Manual page 194

To configure rules for an IP ACL:
1. To add an IP ACL rule to an extended IP ACL, select the ACL ID to add the rule to,
select the check box in the Extended ACL Rule table, and click Add.
Note: The ACL you select must have an ACL ID between 100 and 199.
The page displays the extended ACL Rule Configuration fields.
2. Configure the new rule.
• Rule ID. Specify a number from 1–10 to identify the IP ACL rule. You can create up to
10 rules for each ACL.
• Action. Selects the ACL forwarding action, which is one of the following:
• Permit. Forwards packets which meet the ACL criteria.
• Deny. Drops packets which meet the ACL criteria.
• Egress Queue. Specifies the hardware egress queue identifier used to handle all
packets matching this ACL rule. Enter an identifying number from 0–3 in the
appropriate field.
• Match Every. Requires a packet to match the criteria of this ACL. Select True or
False from the drop down menu. Match Every is exclusive to the other filtering rules,
so if Match Every is True, the other rules on the screen are not available.
194 | Chapter 5: Managing Device Security
GS716Tv2 and GS724Tv3 Software Administration Manual