Voice Vlan; Voice Vlan Properties - NETGEAR GS716T Software Administration Manual

Voice VLAN

Configure the Voice VLAN settings for ports that carry traffic from IP phones. The Voice
VLAN feature can help ensure that the sound quality of an IP phone is safeguarded from
deteriorating when the data traffic on the port is high.
From the VLAN link, you can access the following pages:
•

Voice VLAN Properties

• Voice VLAN Port Setting
• Voice VLAN OUI
Voice VLAN Properties
To display the Voice VLAN Properties page, click Switching Voice VLAN  Basic 
Properties.
To configure Voice VLAN:
1. From the Voice VLAN Status field, enable or disable Voice VLAN on the switch. If the
switch does not handle traffic from IP phones, the status should be disabled.
2. From the Voice VLAN ID field, select the VLAN to use for voice traffic on the switch. The
VLAN must already exist on the switch. For information about how to create VLANs, see
VLAN Configuration
3. From the Class of Service field, set the CoS tag value to be reassigned for packets
received on the Voice VLAN when Remark CoS is enabled.
4. From the Remark CoS field, select Enable or Disable to reassign the CoS tag value to
packets received on the Voice VLAN.
86 | Chapter 3: Configuring Switching Information
GS716Tv2 and GS724Tv3 Software Administration Manual
on page 86
on page 87
on page 88
on page 80.