Sntp Server Configuration - NETGEAR GS716T Software Administration Manual

GS716Tv2 and GS724Tv3 Software Administration Manual
Field
Reference Clock Id
Server Mode
Unicast Sever Max Entries
Unicast Server Current
Entries
Click Refresh to refresh the page with the most current data from the switch.

SNTP Server Configuration

Use the SNTP Server Configuration page to view and modify information for adding and
modifying Simple Network Time Protocol SNTP servers.
To display the SNTP Server Configuration page, click System  Management  Time  SNTP
Server Configuration.
To configure a new SNTP Server:
1. Enter the appropriate SNTP server information in the available fields:
• Server Type. Specifies whether the address for the SNTP server is an IP address
(IPv4) or hostname (DNS).
• Address. Enter the IP address or the hostname of the SNTP server.
• Port. Enter a port number on the SNTP server to which SNTP requests are sent. The
valid range is 1–65535. The default is 123.
Description
Specifies the reference clock identifier of the server for the last received valid
packet.
Specifies the mode of the server for the last received valid packet.
Specifies the maximum number of unicast server entries that can be
configured on this client.
Specifies the number of current valid unicast server entries configured for
this client.
Chapter 2: Configuring System Information | 39