NETGEAR GS716T Software Administration Manual page 91

GS716Tv2 and GS724Tv3 Software Administration Manual
To configure Auto-VoIP settings:
1. Select the check box next to the port to configure. You can select multiple check boxes
to apply the same setting to all selected ports.
2. From the Auto-VoIP Mode menu, specify whether to enable or disable Auto-VoIP on the
selected port.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
4. If you make any changes to this page, click Apply to send the updated configuration to the
switch.
Chapter 3: Configuring Switching Information | 91