Connecting To The Core Network; Figure 29: Switch And Aps Connected Through Network; Figure 30: Switch Connected To Network Core - D-Link DWS-3000 Series User Manual

D-Link Unified Access System Software User Manual
02/15/2011

Figure 29: Switch and APs Connected Through Network

L2/L3 Network
Access Point
Access Point

Connecting to the Core Network

The optional 10GB ports on the DWS-3026 are ideal for uplinking to the core network. Connections to the Gigabit Ethernet
ports are made using a fiber-optic cable or Category 5e copper cable, depending on the type of port. A valid connection is
indicated when the Link LED is lit.
<Link>Figure 30 shows the rear panel of the DWS-3026 with the optional DEM-410X module.

Figure 30: Switch Connected to Network Core

Fiber Optic Cable
Core Network
Page 50 Document 34CS3000-SWUM104-D10