Figure 47: Adding A Valid Ap; Table 18: Valid Access Point Summary - D-Link DWS-3000 Series User Manual

D-Link Unified Access System
After you enter the MAC address of the AP to add to the list, click Add to add the AP to the database and to access the
configuration page for the AP. For an AP that is already in the database, click the MAC address of the AP to access its
configuration page.
The summary of the local AP database in terms of the number of APs of different types is displayed just above the list of the
APs in the database. A popup error message is displayed when the local AP database is full. The popup message is The
local AP database is full, failed to add a new AP.
Use the buttons at the bottom of the page to perform the following tasks:
• Select any AP entry in the list and click Delete to remove that AP's entry from the Valid AP Database.
• Click Delete All to clear the Valid AP database.
• Click Refresh to update the screen with the most current information.
Field
MAC Address
Location
Managed Mode
Profile
If you use the local database for AP validation, the switch maintains the database of access points that you validate. When
you add the MAC address of an AP to the database, you can specify whether the AP is a Managed AP, Standalone AP, or
Page 102

Figure 47: Adding a Valid AP

Table 18: Valid Access Point Summary

Description
Enter the MAC address of the AP in this field. When you add the MAC address, you add the
AP to the local database on the switch.
The location of the AP.
This field displays the current mode of the AP. You can configure the mode on the Valid
Access Point Configuration page, which you access by clicking the MAC address of the AP.
This field displays the AP profile assigned to the AP.
If you have multiple AP profiles, you can assign a new profile to an AP from the summary
page. Select the check box next to one or more APs, then select the new profile from the
menu. Click Change Profile to apply the profile to the selected APs.
Software User Manual
02/15/2011
Document 34CS3000-SWUM104-D10