D-Link DWS-3000 Series User Manual page 121

Software User Manual
02/15/2011
Field
Total Access Points
Standalone Access
Points
Managed Access
Points
Connection Failed
Access Points
Discovered Access
Points
Rogue Access Points
Authentication Failed
Access Points
Total Clients
Authenticated Clients
802.11a Clients
802.11b/g Clients
802.11n Clients
Black-listed Clients
WLAN Utilization
Rogue AP Mitigation
Count
Rogue AP Mitigation
Limit
WLAN Bytes
Transmitted
WLAN Bytes Received
WLAN Packets
Transmitted
WLAN Packets
Received
Use the buttons at the bottom of the page to perform the following tasks:
• Click Refresh to update the screen with the most current information.
• Click Clear Statistics to clear all the statistics on the page.
Document 34CS3000-SWUM104-D10
Table 27: Global WLAN Statistics (Cont.)
Description
Total number of Managed APs in the database. This value is always equal to the sum of
"Managed Access Points," "Connection Failed Access Points," and "Discovered Access
Points."
Total number of detected D-Link Access Points that are in Standalone Mode. APs in
Standalone Mode are not currently managed by a D-Link Unified Switch.
Number of APs in the managed AP database that are authenticated, configured, and have an
active connection with the Unified Switch.
Number of APs that were previously authenticated and managed, but currently don't have
connection with the Unified Switch.
APs that have a connection with the switch but have not been completely configured. This
value includes all managed APs with a "Discovered" or "Authenticated" status.
Number of Rogue APs currently detected on the WLAN. When an AP performs an RF scan,
it might detect access points that have not been validated. It reports these APs as rogues.
Number of access points that failed to authenticate with the Unified Switch.
Total number of clients in the database. This total includes clients with an "Associated",
"Authenticated", or "Disassociated" status.
Total number of clients in the client database with an "Authenticated" status.
Shows the number of clients connected to the 802.11a radio frequency.
Shows the number of clients connected to the 802.11b/g radio frequency.
Shows the number of clients connected to the 802.11n radio frequency.
Shows the number of clients that are configured to be disallowed to associate with any AP that
uses the default AP profile.
Total network utilization across all APs managed by this switch. This is based on global
statistics.
The number of APs to which the wireless system is currently sending de-authentication
messages to mitigate against rogue APs. The range is:
• 0 – Mitigation is not in progress.
• 1 – 16
The default is 0.
The maximum number of APs for which the system can send de-authentication frames. The
range is 16 to a value determined at compile time. The default is 16.
Total bytes transmitted across all APs managed by the switch.
Total bytes received across all APs managed by the switch.
Total packets transmitted across all APs managed by the switch.
Total packets received across all APs managed by the switch.
D-Link Unified Access System
Page 121