Initiating Manual Channel Plan Assignments; Figure 52: Manual Channel Plan; Table 21: Channel Plan History - D-Link DWS-3000 Series User Manual

Unified wired & wireless access system
Hide thumbs Also See for DWS-3000 Series:
Table of Contents

Advertisement

Software User Manual
02/15/2011
Table 21
describes the Channel Plan History fields.
Field
802.11a
802.11g
Operational Status
Last Iteration
Last Algorithm Time
AP MAC Address
Location
Radio
Iteration
Channel
Click Refresh to update the screen with the most current information.

Initiating Manual Channel Plan Assignments

If you specify Manual as the Channel Plan Mode on the Configuration tab, the Manual Channel Plan page allows you to
initiate the Channel Plan algorithm.
To manually run the channel plan adjustment feature, select the radio to update the channels on (802.11a or 802.11g) and
click the Start button.
Document
34CS3000-SWUM104-D10

Table 21: Channel Plan History

Description
The 802.11a and 802.11g radios use different channel plans, so the switch tracks the channel
history separately for each radio. The channel information that displays on the page is only for
the radio you select.
This field shows whether the switch is using the automatic channel adjustment algorithm on
the D-Link Access Point radios.
The number in this field indicates the last iteration of channel plan adjustments. The APs that
received a channel adjustment in previous iterations cannot be assigned new channels in the
next iteration to prevent the same APs from being changed time after time.
On the AP Management > RF Management > Configuration tab, you can set the history
depth to control the maximum number of iterations stored and displayed in the channel plan
history.
Shows the date and time when the channel plan algorithm last ran.
NOTE: To set the system time on the switch, you must use SNTP, which is disabled by
default. From the Web interface, you configure the SNTP client and server information from
the LAN > Administration > SNTP Settings page. From the CLI, use the sntp commands
in Global Config mode.
This table displays the channel assigned to an AP in an iteration of the channel plan.

Figure 52: Manual Channel Plan

D-Link Unified Access System
Page 109

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8500apDwl-3500apDwl-8600ap

Table of Contents