Figure 104:Legend; Figure 105:Sentry Mode - Detailed View - D-Link DWS-3000 Series User Manual

Software User Manual
02/15/2011
The Images menu item shows the icons that represent the WLAN components on the graph.
As the legend shows, the Managed AP icon can be blue, green, or red, depending on the status of the AP:
• Blue—The AP has been discovered and by the switch, but it is in a transitional state. The AP could be waiting to be
authenticated, or it has been validated and authenticated but not configured.
• Green—The AP profile configuration has been applied to the AP, and it is operating in managed mode.
• Red—The switch has lost contact with the AP, the AP is being reset, or the AP has experienced an authentication
failure.
When a radio is operating in Sentry Mode, the antenna on the AP icon is replaced by the letter "S" as
For radios in sentry mode, the AP power display image around the AP is gray.
Document 34CS3000-SWUM104-D10
Figure 104: Legend
Figure 105: Sentry Mode - Detailed View
D-Link Unified Access System
Figure 105 shows.
Page 199