Table 33: Managed Ap Radio Detail - D-Link DWS-3000 Series User Manual

D-Link Unified Access System
Field
Associated Clients
Authenticated Clients
Click Refresh to update the screen with the most current information.
Viewing Detailed Managed Access Point Radio Information
You can view detailed information about each radio on the APs that the Unified Switch manages on the Radio Detail page
for the managed access point radio status.
Table 33 describes the fields you see on the Radio Detail page for the managed access point status.
Field
MAC Address -Location
(Menu)
Radio
Supported Channels
Channel
Transmit Power
Fixed Channel Indicator This flag indicates if a fixed channel is configured and assigned to the radio, a fixed channel
Manual Channel
Adjustment Status
WLAN Utilization
Authenticated Clients
Fixed Power Indicator
Page 130
Table 32: Managed AP Radio Summary
Description
Total count of clients associated on the physical radio, this is a sum of all the clients
associated to each VAP enabled on the radio.
Total number of clients currently associated to the AP that have been authenticated. This is
the sum of all authenticated clients for all the VAPs enabled on the radio.

Table 33: Managed AP Radio Detail

Description
Shows the MAC address and location of the AP to which the values on the page apply. To
view details about a different AP, select its MAC address from the menu.
Indicates the radio interface and configured mode of the radio, if the radio is disabled the radio
mode will be displayed as Off instead of showing the configured mode.
The list of eligible channels the AP reported to the switch for channel assignment. The list is
based on country code, hardware capabilities, and any configured channel limitations.
If radio is operational, the current operating channel for the radio.
If radio is operational, the current transmit power for the radio.
can be configured in the valid AP database (locally or on a RADIUS server).
Indicates the current state of a manual request to change the channel on this radio. The valid
values are:
• Not Started - No request has been made to change the channel.
• Requested - A channel change has been requested by the user but has not been processed
by the switch.
• In Progress - The switch is processing a channel change request for this radio.
• Success - A channel change request is complete.
• Failure - A channel change request failed.
Indicates the total network utilization for the physical radio, this value is based on radio
statistics.
Total count of clients authenticated on the physical radio, this is a sum of all the clients
authenticated to each VAP enabled on the radio.
This flag indicates if a fixed power setting is configured and assigned to the radio, a fixed
transmit power can be configured in the valid AP database (locally or on a RADIUS server).
Software User Manual
02/15/2011
Document 34CS3000-SWUM104-D10