Wds With Ap Mode - D-Link DAP-2330 User Manual

Section 3 - Configuration
Wireless Band: Select 2.4GHz in default.
Mode: WDS with AP mode is selected from the drop-down
menu.
Network Name (SSID): Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN).
The SSID' s factory default setting is dlink. The SSID
can be easily changed to connect to an existing
wireless network or to establish a new wireless
network.
Enable or Disable SSID visibility. Enabling this
SSID Visibility:
feature broadcasts the SSID across the network,
thus making it visible to all network users.
Enabling this feature automatically selects
Auto Channel Selection:
the channel that will provide the best wireless
performance. This feature is not supported in WDS
with AP mode. The channel selection process only
occurs when the AP is booting up.
All devices on the network must share the same
Channel:
channel.To change the channel, use the drop-down
menu to make the desired selection. (Note: The
wireless adapters will automatically scan and match
the wireless settings.)
Allows you to select the channel width you would
Channel Width:
like to operate in. Select 20 MHz if you are not using
any 802.11n wireless clients. Auto 20/40 MHz allows
you to connect to both 802.11n and 802.11b/g
wireless devices on your network.
D-Link DAP-2330 User Manual

WDS with AP Mode

14