Restoring The Factory Settings (F Reset) - Roland V-Drums TD-30 Owner's Manual

Overall Settings for the TD-30 (SETUP)
Restoring the Factory Settings
(F RESET)
This restores the TD-30 to the original factory settings
(Factory reset).
NOTE
When you execute this operation, all data and
settings in the TD-30 will be lost. Before you proceed,
you should save any important data and settings to
your USB flash drive (p. 108).
1.
In the SETUP A screen (p . 114), press the
[F4] (F RESET) button .
The FACTORY RESET screen will appear.
2.
Press the [F5] (F RESET) button .
A confirmation message will appear.
If you decide to cancel the factory reset, press the [F1]
(CANCEL) button.
3.
Press the [F5] (EXECUTE) button .
The factory reset will be executed.
When the factory reset has been completed, a screen like
the following will appear.
122
4.
Specify whether you want to enable or disable
the auto off function (p . 124) .
When you make settings for the auto off function, a
screen like the following will appear.
5.
Use the [–] [+] buttons or dial to select the
Trigger Type (p . 126) .
6.
As described in screen, adjust the offset .
MEMO
The offset adjustment is necessary in order to
correctly detect open/close and pedal movements.